BGS Technic

Sort By:
Show:
Display: List Grid
  • BGS 10pce 1/2" Deep Impact Set 10-24mm
    Description   For both manual and impact wrenches can be fixed on impact wrench by pin and O-ring includes the following tools:   Impact socket, 12.5 mm (1/2") drive: 10 mm Impact socket, 12.5 mm (1/2") drive: 12 mm Impact socket, 12.5 mm (1/2") drive: 13 mm Impact soc..
    Ex Tax: €36.59 €45.00
  • BGS 11pc Impact Adaptor & Universal Joint Set
    Description suitable for both manual and impact wrenches can be fixed on impact wrench by pin and O-ring includes the following tools:   Adaptor 6.3 mm (1/4“) drive - 10 mm (3/8")drive Adaptor 10 mm (3/8") drive - external square 6.3 mm (1/4") Adaptor 10 mm (3/8") drive - ..
    Ex Tax: €69.11 €85.00
  • BGS 13 pcs Crowfoot Spanner Set
    Crowfoot Spanner Set | 12.5 mm (1/2") drive | 20 - 32 mm | 13 pcs.   Description sizes: 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 30 - 32 mm 1 extension bar 125 mm 1 flexible handle 385 mm Technical data Material Chrome Molybdenum Steel Output profile Hexagon Gross wei..
    Ex Tax: €105.69 €130.00
  • BGS 14-piece 1/2 impact socket set 10-32 mm
    - 14-piece 1/2'''' impact socket set, 10-32 mm' - made from chrome molybdenum steel - Pro Torque finish - 10-12-13-14-15-17-18-19-21-22-24-27-30-32 mm - length approx. 75 mm ..
    Ex Tax: €58.54 €72.00
  • BGS 3/4" Bit Hex And Spline Set
    Description Suitable for both manual and impact wrenches can be fixed on impact wrench by pin and O-ring   Internal hexagon sizes:   14 - 17 - 19 - 21 - 22 - 23 - 24 mm Spline sizes (for XZN): M16 - M18   Scope of delivery:   Internal hexagon Impac..
    Ex Tax: €101.63 €125.00
  • BGS Combination Spanner Set | offset | 6 - 22 mm | 12 pcs.
    Description cold forged size spanner length Matt chrome deep offset ring end profile ring end: 12-point Packed in a tetron wallet   includes the following tools:   Combination Spanner: 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 17 - 19 - 22 mm   Technic..
    Ex Tax: €44.72 €55.00
  • BGS External / Internal Puller Set - 5 pcs
    Description for shaft seals hardened carbon steel external puller 40 to 80 mm internal puller 50 to 150 mm   includes the following tools: triple leg gear wheel puller triple leg int. ball-bearing puller 1 deep puller 1 convex screw connection   Tech..
    Ex Tax: €158.54 €195.00
  • BGS Tap and Die Set - 110 pcs
    Description especially for fine threads includes the following tools:   2 tap holders 2 die holders 1 T holder for tap 35 taps (pre- AND main cutter for each size) and dies in following sizes / flank leads: 4-40UNC - 6-32UNC - 8-32UNC - 10-24UNC - 10-32UNF - 12-24UNC - 1/4-20UNC ..
    Ex Tax: €174.80 €215.00